<?php
/**
 * TestLink Open Source Project - http://testlink.sourceforge.net/ 
 * This script is distributed under the GNU General Public License 2 or later. 
 *
 * Filename $RCSfile: config.inc.php,v $
 * @version $Revision: 1.236 $
 * @modified $Date: 2009/03/05 07:32:03 $ by $Author: franciscom $
 *
 * SCOPE:
 * 		Constants and configuration parameters used throughout TestLink 
 * 
 * 		There are included extra files: 
 * 			- your settings - custom_config.inc.php
 * 			- DB access - config_db.inc.php
 * 			- constants - const.inc.php
 * 			- basic checking - configCheck.php
 * 
 * IMPORTANT: 
 * 		To adapt values to your needs DO NOT EDIT THIS FILE but use custom_config.inc.php and   
 * 		replace values of TestLink configuration variables. 
 *    It saves your changes	for the next upgrade in one extra file.
 * 
 * 
 *  -----------------------------------------------------------------------------
 *
 * Revisions:
 *     20090304 - franciscom - BUGID 2171
 *     20090211 - franciscom - added $tlCfg->exec_cfg->enable_tree_testcases_colouring
 *                                   $tlCfg->exec_cfg->enable_tree_counters_colouring
 *
 *     20090126 - franciscom - show_config_check_warning -> config_check_warning_mode
 *     20090103 - franciscom - $tlCfg->req_cfg->coverageStatusAlgorithm
 *     20090103 - franciscom - BUGID 651 - $tlCfg->testcase_cfg->can_remove_executed
 *     20090101 - franciscom - changes in regex used to validate an email address
 *     20081228 - franciscom - gui->layoutMainPageLeft,gui->layoutMainPageRight
 *     20081217 - franciscom - exec_cfg->simple_tester_roles
 *     20081213 - franciscom - more remove of old $g_* config parameters.
 *     20081122 - franciscom - removed some old $g_* config parameters.
 *     20081115 - franciscom - $tlCfg->testcase_cfg->search
 *     20081104 - franciscom - Added FOGBUGZ as BTS type
 *     20081103 - franciscom - Added GFORGE as BTS type
 *     20081006 - franciscom - config for rounding via nifty corners
 *     20080925 - franciscom - refactoring of urgencyImportance config
 *                             $tlCfg->req_cfg->child_requirements_mgmt
 *                             
 *     20080805 - franciscom - api configuration refactoring
 *     20080805 - franciscom - BUGID 1660 - extjs tree is default
 *     20080525 - franciscom - added spectreemenu_type (temporary solution)
 *     20080504 - franciscom - removed gui->enable_custom_fields
 * 		 20080419 - havlatm - documentation update; minor refactorization
 *     20080326 - franciscom - restored configuration parameters removed without reasons.
 *
 * 	   20080423 - havlatm - added $tlCfg as standard configuration holder
 *     20080322 - franciscom - $g_exec_cfg->edit_notes
 *     20080308 - franciscom - changed initial values for email settings
 *     20080304 - franciscom - $g_exec_cfg->show_testsuite_contents
 *     20080208 - franciscom - added contribution seapine BTS (BUGID 1371)
 *     20071112 - franciscom - config changes due to upgrade of Smarty
 *     20071106 - franciscom - BUGID 1165 - $g_testcase_template
 *
 *     20071104 - franciscom - $g_exec_cfg->enable_test_automation
 *                             $g_gui->tprojects_combo_order_by (BUGID 498)
 *     20071006 - franciscom - $g_use_ext_js_library
 *     20070930 - franciscom - BUGID 1086 - configure order by in attachment
 *     20070910 - franciscom - removed MAIN_PAGE_METRICS_ENABLED
 *     20070505 - franciscom - following mantis bug tracking style, if file
 *                             custom_config.inc.php exists, il will be included
 *                             allowing users to customize TL configurations
 *                             managed using global variables, without need
 *                             of changing this file.
 *                             
 *     20070429 - franciscom - added contribution by Seweryn Plywaczyk
 *                             text area custom field
 *
 *     20070415 - franciscom -  added config for drag and drop feature
 *     20070301 - franciscom - 
 *     BUGID 695 - $g_user_self_signup (fawel contribute)
 *
 **/

// ----------------------------------------------------------------------------
/** [INITIALIZATION] - DO NOT CHANGE THE SECTION */

/** @global array Global configuration class */
$tlCfg = new stdClass();
$tlCfg->api = new stdClass();
$tlCfg->document_generator = new stdClass();
$tlCfg->exec_cfg = new stdClass();
$tlCfg->gui = new stdClass();
$tlCfg->testcase_cfg = new stdClass();
$tlCfg->req_cfg = new stdClass();
$tlCfg->validation_cfg = new stdClass();


/** Include database access definition (generated automatically by TL installer) */ 
@include_once('config_db.inc.php');

/** The root dir for the testlink installation with trailing slash */
define('TL_ABS_PATH', dirname(__FILE__) . DIRECTORY_SEPARATOR);

/** Include constants and magic numbers (users should not change it)*/
require_once(TL_ABS_PATH . 'cfg' . DIRECTORY_SEPARATOR . 'const.inc.php');


// ----------------------------------------------------------------------------
/** [LOCALIZATION] */

/** Default localization for users */
// The value must be available in $g_locales (see cfg/const.inc.php).
// Note: An attempt will be done to establish the default locale 
// automatically using $_SERVER['HTTP_ACCEPT_LANGUAGE']
$tlCfg->default_language = 'en_GB'; 

/** 
 * Charset 'UTF-8' is only officially supported charset (Require MySQL version >= 4.1)
 * 'ISO-8859-1' or another Charset could be set for backward compatability by experienced 
 * users. However we have not resources to support such patches.
 **/
$tlCfg->charset = 'UTF-8';

// BUGID 1133 - needed by email_api
$TLS_charset = 'utf-8';


/** characters used to surround a description in the user interface (for example role)*/
$tlCfg->gui_separator_open =  '[';
$tlCfg->gui_separator_close = ']';

/** Title separators are used when componing an title using several strings */
$tlCfg->gui_title_separator_1 = ' : '; // object : name (Test Specification : My best product)
$tlCfg->gui_title_separator_2 = ' - '; // parent - child

// used to create full external id in this way:
// testCasePrefix . g_testcase_cfg->glue_character . external_id
// CAN NOT BE EMPTY
$tlCfg->testcase_cfg->glue_character = '-';


// ----------------------------------------------------------------------------
/** [SERVER ENVIRONMENT] */

/** Error reporting - do we want php errors to show up for users */
error_reporting(E_ALL);

/** Set the session timeout for inactivity (in minutes).
* Default is 60 minutes
*/
$tlCfg->sessionInactivityTimeout = 60;

/** Set the session timeout value (in minutes).
 * This will prevent sessions timing out after very short periods of time 
 * Warning: your server could block this settings
 **/
//ini_set('session.cache_expire',900);

/**
 * Set the session garbage collection timeout value (in seconds)
 * The default session garbage collection in php is set to 1440 seconds (24 minutes)
 * If you want sessions to last longer this must be set to a higher value.
 * You may need to set this in your global php.ini if the settings don't take effect.
 */
//ini_set('session.gc_maxlifetime', 54000);


// ----------------------------------------------------------------------------
/** [LOGGING] */

/** Default level of logging (NONE, ERROR, INFO, DEBUG, EXTENDED) */
$tlCfg->log_level = 'ERROR';

/** show smarty debug window */
$tlCfg->smarty_debug = false;

/** Path to store logs */
$tlCfg->log_path = TL_ABS_PATH . 'logs' . DIRECTORY_SEPARATOR ;


/** 
 *  How to warning user when security weak points exists.
 *
 * 'SCREEN': messages will displayed on login screen, and tl desktop (default)
 * 'FILE': a file with a list is created but users are not notified via GUI
 *         user will receive a message on screen.
 * 'SILENT': same that FILE, but user will not receive message on screen.
 */
$tlCfg->config_check_warning_mode = 'FILE';

/** 
 * Configure if individual logging data stores are enabled of disabled
 * Possibile values to identify loggers: 'db','file'
 *		$g_loggerCfg=null; all loggers enabled (default) 
 * 		$g_loggerCfg['db']['enable']=true/false;
 * 		$g_loggerCfg['file']['enable']=true/false;
 */
$g_loggerCfg = null;

/** All events older this value [days] are removed from the db, during login */
$g_removeEventsOlderThan = 30;


// ----------------------------------------------------------------------------
/** [Bug Tracking systems] */
/** 
 * TestLink uses bugtracking systems to check if displayed bugs resolved, verified, 
 * and closed bugs. If they are it will strike through them
 *
 * @var STRING g_interface_bugs = [
 * 'NO'        : no bug tracking system integration (DEFAULT)
 * 'BUGZILLA'  : edit configuration in TL_ABS_PATH/cfg/bugzilla.cfg.php
 * 'MANTIS'    : edit configuration in TL_ABS_PATH/cfg/mantis.cfg.php
 * 'JIRA'      : edit configuration in TL_ABS_PATH/cfg/jira.cfg.php
 * 'TRACKPLUS' : edit configuration in TL_ABS_PATH/cfg/trackplus.cfg.php
 * 'EVENTUM'   : edit configuration in TL_ABS_PATH/cfg/eventum.cfg.php
 * 'SEAPINE'   : edit configuration in TL_ABS_PATH/cfg/seapine.cfg.php
 * 'GFORGE'    : edit configuration in TL_ABS_PATH/cfg/gforge.cfg.php
 * 'FOGBUGZ'   : edit configuration in TL_ABS_PATH/cfg/fogbugz.cfg.php
 * ]
 */
$g_interface_bugs = 'NO';


// ----------------------------------------------------------------------------
/** [SMTP] */

// Developer Note:
// these config variable names has been choosed to maintain compatibility
// with code taken from Mantis.
// 
// SMTP server Configuration ("localhost" is enough in the most cases)
$g_smtp_host        = '[smtp_host_not_configured]';  # SMTP server MUST BE configured  

# Configure using custom_config.inc.php
$g_tl_admin_email     = '[testlink_sysadmin_email_not_configured]'; # for problem/error notification 
$g_from_email         = '[from_email_not_configured]';  # email sender
$g_return_path_email  = '[return_path_email_not_configured]';

# Urgent = 1, Not Urgent = 5, Disable = 0
$g_mail_priority = 5;   

# Taken from mantis for phpmailer config
define ("SMTP_SEND",2);
$g_phpMailer_method = SMTP_SEND;

// Configure only if SMTP server requires authentication
$g_smtp_username    = '';  # user  
$g_smtp_password    = '';  # password 


// ----------------------------------------------------------------------------
/** [User Authentication] */                 

/** 
 * Login authentication method:
 * 		'MD5' => use password stored on db
 *    'LDAP' => use password from LDAP Server
 */ 
$tlCfg->authentication['method'] = 'MD5';

/** LDAP authentication credentials */
$tlCfg->authentication['ldap_server']		= 'localhost';
$tlCfg->authentication['ldap_port']			= '389';
$tlCfg->authentication['ldap_version']		= '3'; // could be '2' in some cases
$tlCfg->authentication['ldap_root_dn']		= 'dc=mycompany,dc=com';
$tlCfg->authentication['ldap_organization']	= '';    // e.g. '(organizationname=*Traffic)'
$tlCfg->authentication['ldap_uid_field']	= 'uid'; // Use 'sAMAccountName' for Active Directory
$tlCfg->authentication['ldap_bind_dn']		= ''; // Left empty for anonymous LDAP binding 
$tlCfg->authentication['ldap_bind_passwd']	= ''; // Left empty for anonymous LDAP binding 


/** Enable/disable Users to create accounts on login page */
$tlCfg->user_self_signup = TRUE; 

/** Validating new user login names */
$tlCfg->validation_cfg->user_login_valid_regex='/^[\w \-]+$/';

/** Validating user email addresses */
/* added final i - to allow also Upper Case - info taken from PHP Manual and Mantis */
// $tlCfg->validation_cfg->user_email_valid_regex = "/^[a-z0-9!#$%&'*+\/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+\/=?^_`" .
// 		                        "{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])?$/i";
// 

/* Taken from Ext-js VTypes.js */
$tlCfg->validation_cfg->user_email_valid_regex = "/^([\w]+)(.[\w]+)*@([\w-]+\.){1,5}([A-Za-z]){2,4}$/";

// --------------------------------------------------------------------------------------
/** [API] */

/** XML-RPC API availability (disabled by default) */ 
$tlCfg->api->enabled = FALSE;

// used to display API ID info in the *View pages 
$tlCfg->api->id_format = "[ID: %s ]";


// --------------------------------------------------------------------------------------
/** [GUI LAYOUT] */

/** GUI themes (base for CSS and images)- modify if you create own one */
$tlCfg->theme_dir = 'gui/themes/default/';

/** Dir for compiled templates */
$tlCfg->temp_dir = TL_ABS_PATH . 'gui' . DIRECTORY_SEPARATOR . 'templates_c' . DIRECTORY_SEPARATOR;

/** Company logo (used by navigation bar and login page page) */
//$tlCfg->company_logo = '<img alt="TestLink" title="TestLink" style="width: 115px; height: 53px;" src="' . 
//                          $tlCfg->theme_dir . 'images/company_logo.png" />';
$tlCfg->company_logo = 'company_logo.png';

/** Login page could show an informational text */
$tlCfg->login_info = ''; // Empty by default

/** Image for main menu item bullet (just filename) */
$tlCfg->bullet_image = 'slide_gripper.gif';  // = [arrow_org.gif, slide_gripper.gif]

/** Availability of Test Project specific background colour */
// 'background'  -> standard behaviour for 1.6.x you can have a different
//                  background colour for every test project.
// 'none'        -> new behaviour no background color change 
// $tlCfg->gui->testproject_coloring = 'background'; // Francisco, do not change it!
$tlCfg->gui->testproject_coloring = 'none'; // I'm sorry default is not coloring using coloring is a pain
                                            // and useless
// @TODO Ok, then merge these two attributes into one                                           
/** default background color */
$tlCfg->gui->background_color = '#9BD';

// Enable/disable rounded corners via javascript
$tlCfg->gui->round_corners=new stdClass();
$tlCfg->gui->round_corners->exec_history=ENABLED;
$tlCfg->gui->round_corners->tc_title=ENABLED;
$tlCfg->gui->round_corners->tc_spec=ENABLED;

/** Display name definition (used to build a human readable display name for users) */
// '%first% %last%'          -> John Cook
// '%last%, %first%'          -> John Cook
// '%first% %last% %login%'    -> John Cook [ux555]
$tlCfg->username_format = '%login%';

/** Configure the frame frmWorkArea navigator width */
$tlCfg->frame_workarea_default_width = "30%";

/** true => icon edit will be added into <a href> as indication an edit features */
$tlCfg->gui->show_icon_edit=false;

/** Order to use when building a testproject combobox (value must be SQL compliant)*/
// 'ORDER BY name'
// 'ORDER_BY nodes_hierarchy.id DESC' -> similar effect to order last created firts
$tlCfg->gui->tprojects_combo_order_by='ORDER BY nodes_hierarchy.id DESC';

// used to round percentages on metricsDashboard.php
$tlCfg->dashboard_precision = 2;

/** Choose what kind of webeditor you want to use in every TL area.
 *
 */
$tlCfg->gui->text_editor = array();

// This configuration will be used if no element with search key (area) is found
// on this structure.
// Every element is a mp with this configuration keys:
//
// 'type':
//        'fckeditor'
//        'tinymce'
//        'none' -> use plain text area input field
//
// 'toolbar': only applicable for type = 'fckeditor'
//            name of ToolbarSet  (See: http://docs.fckeditor.net/ for more information about ToolbarSets)
//
// 'configFile': only applicable for type = 'fckeditor'
//               (See: http://docs.fckeditor.net/ for more information about CustomConfigurationsPath)
//
// 'height': the height in px for FCKEditor 
// 'width': the width in px for FCKEditor
// 'cols': the number of cols for tinymce and none
// 'rows': the number of rows for tinymce and none
// Hint: After doing configuration changes, clean you Browser's cookies and cache 
//
$tlCfg->gui->text_editor['all'] = array( 
									'type' => 'fckeditor', 
                                    'toolbar' => 'tl_default', 
                                    'configFile' => 'cfg/tl_fckeditor_config.js',
								);

// Copy this to custom_config.inc.php if you want use 'tinymce' as default.
// $tlCfg->gui->text_editor['all'] = array( 'type' => 'tinymce');
// 
// Copy this to custom_config.inc.php if you want use 'nome' as default.
// $tlCfg->gui->text_editor['all'] = array( 'type' => 'none');

// Suggested for BETTER Performance with lot of testcases
$tlCfg->gui->text_editor['execution'] = array( 'type' => 'none');

// Enable and configure this if you want to have different
// webeditor type in different TL areas
// You can not define new areas without making changes to php code
//
// $tlCfg->gui->text_editor['execution'] = array( 'type' => 'none');  // BETTER Performance with lot of testcases
// 
// This configuration is useful only if default type is set to 'fckeditor'
// $tlCfg->gui->text_editor['design'] = array('toolbar' => 'tl_mini');
// 
// $tlCfg->gui->text_editor['testplan'] = array( 'type' => 'none');
// $tlCfg->gui->text_editor['build'] = array( 'type' => 'fckeditor','toolbar' => 'tl_mini');
// $tlCfg->gui->text_editor['testproject'] = array( 'type' => 'tinymce');
// $tlCfg->gui->text_editor['role'] = array( 'type' => 'tinymce');
// $tlCfg->gui->text_editor['requirement'] = array( 'type' => 'none');
// $tlCfg->gui->text_editor['requirement_spec'] = array( 'type' => 'none');

/** 
 * fckeditor Toolbar - modify which icons will be available in html edit pages
 * refer to fckeditor configuration file 
 **/
// $tlCfg->fckeditor_default_toolbar = 'tl_default';

/* User can choose order of menu areas */
$tlCfg->gui->layoutMainPageLeft = array( 'testProject' => 1, 'userAdministration' => 2 ,
                                         'requirements' => 3, 'testSpecification' => 4);

$tlCfg->gui->layoutMainPageRight = array( 'testPlan' => 1, 'testExecution' => 2 ,
                                          'testPlanContents' => 3);

// ----------------------------------------------------------------------------
/** [GUI: TREE] */

/** 
 * TREE MENU - Configure using of external tree menu component: 
 * [EXTJS, LAYERSMENU, DTREE, JTREE]
 */
$tlCfg->treemenu_type = 'EXTJS';

/** Default ordering value for new Test Suites and Test Cases to separate them */
$tlCfg->treemenu_default_testsuite_order = 1;
$tlCfg->treemenu_default_testcase_order = 100;

/** show/hide testcase id on tree menu */
$tlCfg->treemenu_show_testcase_id = TRUE;


// ----------------------------------------------------------------------------
/** [GUI: Javascript libraries] */

/** ENABLED -> use EXT JS library; DISABLED - simple html */
$g_use_ext_js_library = ENABLED;

// May be in future another table sort engine will be better
// kryogenix.org -> Stuart Langridge sortTable
// '' (empty string) -> disable table sorting feature
$g_sort_table_engine='kryogenix.org';


// ----------------------------------------------------------------------------
/** [GENERATED DOCUMENTATION] */

/**
 * Texts and settings for printed documents
 * Leave text values empty if you would like to disable it.
 */
$tlCfg->document_generator->company_name = 'Testlink Community [configure using $tlCfg->company->name]';

/** Image is expected in directory <testlink_root>/gui/themes/<your_theme>/images/ */
$tlCfg->document_generator->company_copyright = '2009 (c) Testlink Community';
$tlCfg->document_generator->confidential_msg = '';

/** CSS used in printed html documents */
$tlCfg->document_generator->css_template = $tlCfg->theme_dir . 'css/tl_documents.css';

/** Misc settings */
$tlCfg->document_generator->tc_version_enabled = FALSE;


// ----------------------------------------------------------------------------
/** [Test Executions] */

// ENABLED -> enable XML-RPC calls to external test automation server
//      new buttons will be displayed on execution pages
// DISABLED -> disable
$tlCfg->exec_cfg->enable_test_automation = DISABLED;

// 1 -> user can edit execution notes, on old executions (Attention: user must have test case execution right)
// DISABLED -> no edit allowed [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->edit_notes = DISABLED;

// ASCending   -> last execution at bottom
// DESCending  -> last execution on top      [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->history_order = 'DESC';

// TRUE  -> the whole execution history for the choosen build will be showed
// FALSE -> just last execution for the choosen build will be showed [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->history_on = FALSE;

// TRUE  ->  test case VERY LAST (i.e. in any build) execution status will be displayed
// FALSE -> only last result on current build.  [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->show_last_exec_any_build = FALSE;

// TRUE  ->  History for all builds will be shown
// FALSE ->  Only history of the current build will be shown  [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->show_history_all_builds = FALSE;

// different models for the attachments management on execution page
// $att_model_m1 ->  shows upload button and title 
// $att_model_m2 ->  hides upload button and title
$tlCfg->exec_cfg->att_model = $att_model_m2;   //defined in const.inc.php

// ENABLED -> User can delete an execution result
// DISABLED -> User can not.  [STANDARD BEHAVIOUR]
$tlCfg->exec_cfg->can_delete_execution = DISABLED;

// ENABLED -> test cases will be coloured according to test case status
$tlCfg->exec_cfg->enable_tree_testcases_colouring = ENABLED;

// ENABLED -> test case counters will be coloured according to test case status
$tlCfg->exec_cfg->enable_tree_counters_colouring = ENABLED;


// 20080303 - franciscom
// This can help to avoid performance problems.
// Controls what happens on right frame when user clicks on a testsuite on tree.
// ENABLED -> show all test cases presents on test suite and children test suite.
// DISABLED -> nothing happens, to execute a test case you need to click on test case
$tlCfg->exec_cfg->show_testsuite_contents = DISABLED;

// ENABLED -> enable testcase counters by status on tree
$tlCfg->exec_cfg->enable_tree_testcase_counters = ENABLED;


// Define list of roles that are affected by: 
// $tlCfg->exec_cfg->view_mode and $tlCfg->exec_cfg->exec_mode
// User must reconfigure if define other simple tester roles
//
// In addition (till code changes) also roles that verify this condition:
// $effective_role->hasRight('testplan_execute') and !$effective_role->hasRight('testplan_planning')
// Will be affected by:
// $tlCfg->exec_cfg->view_mode and $tlCfg->exec_cfg->exec_mode
// 
$tlCfg->exec_cfg->simple_tester_roles=array(TL_ROLES_TESTER);

// Filter Test cases a user with tester role can VIEW depending on
// test execution assignment.
// all: all test cases.
// assigned_to_me: test cases assigned to logged user.
// assigned_to_me_or_free: test cases assigned to logged user or not assigned
$tlCfg->exec_cfg->view_mode->tester='assigned_to_me';

// Filter Test cases a user with tester role can EXECUTE depending on
// test execution assignment.
// all: all test cases.
// assigned_to_me: test cases assigned to logged user.
// assigned_to_me_or_free: test cases assigned to logged user or not assigned
$tlCfg->exec_cfg->exec_mode->tester='assigned_to_me';

/** User filter in Test Execution navigator - default value */
// logged_user -> combo will be set to logged user
// none        -> no filter applied by default 
$tlCfg->exec_cfg->user_filter_default='none';


// ----------------------------------------------------------------------------
/** [Test Specification] */

// 'horizontal' ->  step and results on the same row
// 'vertical'   ->  steps on one row, results in the row bellow
$g_spec_cfg->steps_results_layout = 'vertical';

// ENABLED -> User will see a test suite filter while creating test specification
// DISABLED -> no filter available
$g_spec_cfg->show_tsuite_filter = ENABLED;

// ENABLED -> every time user do some operation on test specification
//      tree is updated on screen.
// DISABLED -> tree will not be updated, user can update it manually.
$g_spec_cfg->automatic_tree_refresh = ENABLED;

// ENABLED -> user can edit executed tc versions
// DISABLED -> editing of executed tc versions is blocked.  [STANDARD BEHAVIOUR]
$tlCfg->testcase_cfg->can_edit_executed = DISABLED;

// ENABLED -> user can removed from a testplan executed tc versions. [STANDARD BEHAVIOUR]
// DISABLED -> user can NOT remove from a testplan executed tc versions.  
$tlCfg->testcase_cfg->can_remove_executed = ENABLED;


// To avoid perfomance problems on search test case feature,
// we can decide when to inform user that results can not be displayed
// due to too many results.
$tlCfg->testcase_cfg->search=new stdClass();
$tlCfg->testcase_cfg->search->max_qty_for_display=200;
        
/** text template for a new Test Case summary, steps and expected_results */
// object members has SAME NAME that FCK editor objects.
// the logic present on tcEdit.php is dependent of this rule.
// every text object contains an object with following members: type and value
// 
// Possible values for type member: 
// none: template will not be used, default will be a clean editor screen.
// string: value of value member is assigned to FCK object
// string_id: value member is used in a lang_get() call, and return value 
//       is assigned to FCK object. Configure string_id on custom_strings.txt
// file: value member is used as file name.
//       file is readed and it's contains assigned to FCK object
//
// any other value for type, results on '' assigned to FCK object

$g_testcase_template->summary->type = 'none';
$g_testcase_template->summary->value = '';

$g_testcase_template->steps->type = 'none';
$g_testcase_template->steps->value = '';

$g_testcase_template->expected_results->type = 'none';
$g_testcase_template->expected_results->value = '';

/** text template for a new Test Suite description */
$g_testsuite_template->details->type = 'none';
$g_testsuite_template->details->value = '';


// ----------------------------------------------------------------------------
/** [ATTACHMENTS] */

/** Attachment feature availability */
$g_attachments->enabled = TRUE;

/** the type of the repository can be database or filesystem
 * TL_REPOSITORY_TYPE_DB => database
 * TL_REPOSITORY_TYPE_FS => filesystem
 **/
$g_repositoryType = TL_REPOSITORY_TYPE_FS;

/** 
 * TL_REPOSITORY_TYPE_FS: the where the filesystem repository should be located
 * We recommend to change the directory for security reason. 
 **/
$g_repositoryPath = TL_ABS_PATH . "upload_area" . DIRECTORY_SEPARATOR;

/** 
 * compression used within the repository 
 * TL_REPOSITORY_COMPRESSIONTYPE_NONE => no compression
 * TL_REPOSITORY_COMPRESSIONTYPE_GZIP => gzip compression
 */
$g_repositoryCompressionType = TL_REPOSITORY_COMPRESSIONTYPE_NONE;

// the maximum allowed file size for each repository entry, default 1MB.
// Also check your PHP settings (default is usually 2MBs)
$tlCfg->repository_max_filesize = 1; //MB

// TRUE -> when you upload a file you can give no title
$g_attachments->allow_empty_title = TRUE;

// $g_attachments->allow_empty_title == TRUE, you can ask the system
// to do something 
// 
// 'none'         -> just write on db an empty title
// 'use_filename' -> use filename as title
//$g_attachments->action_on_save_empty_title='use_filename';
//
$g_attachments->action_on_save_empty_title = 'none';

// Remember that title is used as link description for download
// then if title is empty, what the system has to do when displaying ?
// 'show_icon'  -> the $g_attachments->access_icon will be used.
// 'show_label' -> the value of $g_attachments->access_string will be used .
$g_attachments->action_on_display_empty_title = 'show_icon';

// martin: @TODO use an image file only
$g_attachments->access_icon = '<img src="' . $tlCfg->theme_dir . 'images/new_f2_16.png" style="border:none" />';
$g_attachments->access_string = "[*]";

// Set display order of uploaded files - BUGID 1086
$g_attachments->order_by = " ORDER BY date_added DESC ";


// ----------------------------------------------------------------------------
/** [Requirements] */

// true : you want req_doc_id UNIQUE IN THE WHOLE DB (system_wide)
// false: you want req_doc_id UNIQUE INSIDE a SRS
$tlCfg->req_cfg->reqdoc_id->is_system_wide = FALSE;

/** 
 * Test Case generation from Requirements - use_req_spec_as_testsuite_name
 *	FALSE => test cases are created and assigned to a test suite 
 * 	         with name $tlCfg->req_cfg->default_testsuite_name
 * 	TRUE  => REQuirement Specification Title is used as testsuite name     
 */
$tlCfg->req_cfg->use_req_spec_as_testsuite_name = TRUE;
$tlCfg->req_cfg->default_testsuite_name = "Auto-created Test cases";
$tlCfg->req_cfg->testsuite_details = "Test Cases in the Test Suite are generated from Requirements. " .
		                            "A refinement of test scenario is highly recommended.";
$tlCfg->req_cfg->testcase_summary_prefix = "<b>The Test Case was generated from the assigned requirement.</b><br />";


// ENABLED: allow N level depth tree 
// DISABLED: just one level
$tlCfg->req_cfg->child_requirements_mgmt = DISABLED;

// 20090111 - franciscom
// Order of test cases status in this array, is used to undestand
// to what status set requirement in the requirements report.
// Standard algorithm, present in getReqCoverage(), is:
//
// 
// if at least one of Test Cases linked to Requirement has status FAILED
//    Requirement Coverage Status = FAILED
// else if at least one of Test Cases linked to Requirement has status BLOCKED
//    Requirement Coverage Status = BLOCKED
// else if ALL Test Cases linked to Requirement has status NOT RUN
//    Requirement Coverage Status = NOT RUN
// else if ALL Test Cases linked to Requirement has status PASSED
//    Requirement Coverage Status = PASSED
// else 
//    Requirement Coverage Status = Partially Passed
//
// This logic is implemented using following config parameter
$tlCfg->req_cfg->coverageStatusAlgorithm['checkOrder']=array('atLeastOne','all');
$tlCfg->req_cfg->coverageStatusAlgorithm['checkType']['atLeastOne']=array('failed','blocked');
$tlCfg->req_cfg->coverageStatusAlgorithm['checkType']['all']=array('not_run','passed');

// Configure here what status has to get requirement when check of type 'all' fails like
// in following situation (BUGID 2171)
// If particular requirement has assigned more than one test cases, and:
// - at least one of assigned test cases was not yet executed           
// - the rest of assigned test cases was executed and passed            
// then on the "Requirements based report" this particular requirement is not shown at all (in any section).
// 
// $tlCfg->req_cfg->coverageStatusAlgorithm['checkFail']['all']='partially_passed';
// $tlCfg->req_cfg->coverageStatusAlgorithm['displayOrder']=array('passed','failed',
//                                                                'blocked','not_run','partially_passed');
$tlCfg->req_cfg->coverageStatusAlgorithm['checkFail']['all']='failed';
$tlCfg->req_cfg->coverageStatusAlgorithm['displayOrder']=array('passed','failed','blocked','not_run');


// ----------------------------------------------------------------------------
/** [MISC FUNCTIONALITY] */

/** Maximum uploadfile size to importing stuff in TL */
// Also check your PHP settings (default is usually 2MBs)
$tlCfg->import_max_size = '204800'; // in bytes

/** Maximum line size of the imported file */
$tlCfg->import_max_row = '10000'; // in chars

/** Set the default role used for new users */
// - created from the login page.
// - created using user management features
$tlCfg->default_roleid = TL_ROLES_GUEST;


/** 
 * Check unique titles of Test Project, Test Suite and Test Case
 *  ENABLED  => Check              [STANDARD BEHAVIOUR]
 *  DISABLED => don't check
 **/
$tlCfg->check_names_for_duplicates = ENABLED;

/** 
 * Action for duplication check (only if check_names_for_duplicates=ENABLED)
 * 'allow_repeat' => allow the name to be repeated (backward compatibility)
 * 'generate_new' => generate a new name using $g_prefix_name_for_copy
 * 'block'        => return with an error 
 **/    
$tlCfg->action_on_duplicate_name = 'generate_new';

/** 
 * String checking and conversions
 * Allow automatically convert www URLs and email adresses into clickable links 
 * used by function string_display_links() for example by custom fields. 
 * Valid values = ENABLED/DISABLED.  
 **/
$tlCfg->html_make_links = ENABLED;

/**
 * Define the valid html tags for "content driven" single-line and multi-line fields.
 * Do NOT include tags with parameters (eg. <font face="arial">), img and href.
 * It's used by function string_display_links() for example by custom fields. 
 */
$tlCfg->html_valid_tags = 'p, li, ul, ol, br, pre, i, b, u, em';
$tlCfg->html_valid_tags_single_line = 'i, b, u, em';

/**
 * Defines the threshold values for filtering TC by a priority according to the formula
 *  ui 		=>	(urgency*importance) 
 *  LOW 	=> all Tc's with ui < LOW_Threshold
 *  HIGH 	=> all Tc's with ui >= HIGH_Threshold
 *  MEDIUM  => all Tc's with ui >= LOW_Threshold AND ui < HIGH_Threshold
 */
$tlCfg->urgencyImportance = new stdClass();
$tlCfg->urgencyImportance->threshold['low'] = 3;
$tlCfg->urgencyImportance->threshold['high'] = 6;


// ----- End of Config ------------------------------------------------------------------
// --------------------------------------------------------------------------------------
// DO NOT CHANGE NOTHING BELOW
// --------------------------------------------------------------------------------------

// havlatm: @TODO move the next code out of config - configCheck.php -> included via common.php
/** Functions for check request status */
require_once('configCheck.php');

/** root of testlink directory location seen through the web server */
// @TODO: basehref should be defined by installation script or stored from login in $_SESSION
/*  20070106 - franciscom - this statement it's not 100% right      
    better use $_SESSION['basehref'] in the scripts. */      
define('TL_BASE_HREF', get_home_url()); 


clearstatcache();
if ( file_exists( TL_ABS_PATH . 'custom_config.inc.php' ) ) 
  require_once( TL_ABS_PATH . 'custom_config.inc.php' ); 

/** Support for localization */
//	@TODO schlundus, move the code out of config and do it only once and not always in any include!
//	@TODO schlundus, a better parsing function should be include
$serverLanguage = false;
if (isset($_SERVER['HTTP_ACCEPT_LANGUAGE']))
{
	@list($code) = explode(",",$_SERVER['HTTP_ACCEPT_LANGUAGE']);
	@list($a,$b) = explode("-",$code);
	if ($a && $b)
	{
		$a = strtolower($a);
		$b = strtoupper($a);
		$serverLanguage = $a."_".$b;
	}
}
	
if(false !== $serverLanguage)
{
	if (array_key_exists($serverLanguage,$g_locales))
		$tlCfg->default_language = $serverLanguage;
}
define ('TL_DEFAULT_LOCALE', $tlCfg->default_language);

require_once(TL_ABS_PATH .'cfg'.DIRECTORY_SEPARATOR.'userRightMatrix.php');

// Reverted execution status is used for two applications.
// 1. To map code to CSS, Please if you add an status you need to add a corresponding CSS Class
//    in the CSS files (see the gui directory)
// 2. to decode from code to some more human oriented to use in code
//
/** Revered list of Test Case execution results */
$tlCfg->results['code_status'] = array_flip($tlCfg->results['status_code']);


// --------------------------------------------------------------------------------------
/** Converted and derived variables (Users should not modify this section) */
define('REFRESH_SPEC_TREE',$g_spec_cfg->automatic_tree_refresh ? 'yes' : 'no');
define('TL_SORT_TABLE_ENGINE',$g_sort_table_engine);
define("TL_REPOSITORY_MAXFILESIZE", 1024*1024*$tlCfg->repository_max_filesize); 

define('TL_XMLEXPORT_HEADER', "<?xml version=\"1.0\" encoding=\"" . $tlCfg->charset . "\"?>\n");

define('TL_THEME_BASE_DIR', $tlCfg->theme_dir);
define('TL_THEME_IMG_DIR', $tlCfg->theme_dir . 'images/');
define('TL_THEME_CSS_DIR', $tlCfg->theme_dir . 'css/');
define('TL_TESTLINK_CSS', TL_THEME_CSS_DIR . TL_CSS_MAIN);
define('TL_PRINT_CSS', TL_THEME_CSS_DIR . TL_CSS_PRINT);
define('TL_TREEMENU_CSS', TL_THEME_CSS_DIR . TL_CSS_TREEMENU);

// --------------------------------------------------------------------------------------
// when a role is deleted, a new role must be assigned to all users
// having role to be deleted
// A right choice seems to be using $g_default_roleid.
// You can change this adding a config line in custom_config.inc.php
// @TODO martin: remove - use directly $tlCfg->default_roleid;
$g_role_replace_for_deleted_roles=$tlCfg->default_roleid;


/** 
BUGID 0000086: Using "|" in the testsuite name causes malformed URLs
regexp used to check for chars not allowed in:
test project, test suite and testcase names.
@TODO martin: encode harm characters @see http://cz.php.net/urlencode (and remove the parameter)
*/
$g_ereg_forbidden = "[|]";


/** @TODO martin: remove from configuration and use a number in brackets after name ("My Test Title(2)") 
 * Used when creating a Test Suite using copy 
   and you have choose  $g_action_on_duplicate_name = 'generate_new'
   if the name exist.
 */
$g_prefix_name_for_copy = strftime("%Y%m%d-%H:%M:%S", time());

// TRUE  -> you can create multiple time the same keyword 
//           for the same product (term used on TL < 1.7) / test project (term used on TL>= 1.7) 
// FALSE ->   [STANDARD BEHAIVOUR]
// @TODO havlatm: remove the possibility duplicate it (have no sense)
$g_allow_duplicate_keywords = FALSE;

/** 
 * martin: @TODO remove - $g_action_on_duplicate_name is enough to define behaviour
 * Check unique titles of Test Project, Test Suite and Test Case
 *  TRUE  => Check              [STANDARD BEHAVIOUR]
 *  FALSE => don't check
 **/
// $g_check_names_for_duplicates = TRUE;


/** 
 * @TODO remove from TL - unfinished refactorization; 
 * use $tlCfg instead of old variables and constants
 */
define('TL_IMPORT_LIMIT', $tlCfg->import_max_size); 
define('TL_IMPORT_ROW_MAX', $tlCfg->import_max_row); 
define('TL_ITEM_BULLET_IMG', TL_THEME_IMG_DIR . $tlCfg->bullet_image);
define('TL_TREE_KIND', $tlCfg->treemenu_type);
define('USE_EXT_JS_LIBRARY', $g_use_ext_js_library);
define('TL_TPL_CHARSET', $tlCfg->charset);
define('TITLE_SEP',$tlCfg->gui_title_separator_1);
define('TITLE_SEP_TYPE2',$tlCfg->gui_title_separator_2);
define('TITLE_SEP_TYPE3',$tlCfg->gui_title_separator_2); // obsolete: use type 1,2
define('TL_FRMWORKAREA_LEFT_FRAME_WIDTH', $tlCfg->frame_workarea_default_width); 
define('TL_TEMP_PATH', $tlCfg->temp_dir);
// $g_log_level=$tlCfg->log_level;

$tlCfg->document_generator->company_logo = $tlCfg->company_logo; 

$tlCfg->gui->title_separator_1 =  $tlCfg->gui_title_separator_1;
$tlCfg->gui->title_separator_2 =  $tlCfg->gui_title_separator_2;
$tlCfg->gui->role_separator_open =  $tlCfg->gui_separator_open;
$tlCfg->gui->role_separator_close = $tlCfg->gui_separator_close;
// ----- END OF FILE --------------------------------------------------------------------
?>